Home > Electrodes > AWS Class ER410 Mig & Tig Filler Welding Wire & Rod
ED Stainless makes AWS Class ER410 MIG and TIG filler wire and rod in Houston, serving clients needing martensitic stainless weld metal for moderate-temperature applications. Through careful alloy control, their wire and rod meet AWS standards and deliver consistent performance. ED Stainless stocks ER410 to support regional fabrication shops and offers technical help and fast delivery. This filler is best for repairing ferromagnetic stainless steel and for new constructions. Its strong mechanical properties and cost-effectiveness make it a popular choice for applications requiring moderate corrosion resistance and strength, especially where a magnetic filler is suitable or needed.
ER410 contains 11–13% chromium, less than 0.75% nickel, small amounts of manganese and silicon, and carbon between 0.08–0.15%, resulting in a martensitic microstructure after welding. Tensile strength ranges from 75–95 ksi (515–655 MPa), with yield strength around 55–65 ksi (380–450 MPa). Elongation is moderate (15–20%), and hardness can reach HRC 25–30 with proper heat treatment. It has good impact strength and fatigue resistance. While it lacks ductility compared to austenitic grades, it excels in strength and moderate corrosion resistance, making it suitable for structural stainless steel joints where magnetic properties are acceptable.
| Classification | AWS A5.9, ER410 |
| Form | MIG spools, TIG cut lengths, Reels and Coils |
| Type Of Welding | Inert Gas Welding |
| Current | MIG-DCEP / TIG-DCEN |
| Diameters | .023”, .030”, .035”, .045”, 1/16”, 3/32”, 1/8” |
| Standard TIG straight lengths are available | 36” (914 mm) or 39” (1000 mm) lengths. Other lengths available upon request. |
| AWS ER410 MIG & TIG Filler Metal Application & uses |
|
| C | Cr | Ni | Mo | Mn | Si | P | S | Cu |
| 0.12 | 11.5-13.5 | 0.6 | 0.75 | 0.6 | 0.5 | 0.03 | 0.03 | 0.75 |
| Yield, kpsi: | 78 |
| Tensile Strength, kpsi: | 89 |
| Elongation%, min: | 24 |
Contact us to get a quick quote for your requirement.
ER410 MIG filler wire offers high strength and wear resistance, ideal for welding martensitic stainless steels in applications requiring durability and high-temperature performance.
ER410 TIG filler wire provides excellent hardness and abrasion resistance, suitable for welding stainless steel components exposed to high stress and wear, ensuring strong, durable joints.
ER410 TIG filler rod delivers superior hardness and wear resistance, used for welding martensitic stainless steels in high-stress environments, offering strong, reliable welds and durability.
Each AWS Class ER410 MIG and TIG Filler Welding Wire and Rod is carefully packed using high-quality materials. To prevent any damage or corrosion during transit. We are committed to guaranteeing customer satisfaction by providing timely deliveries. Through efficient transportation methods. Along with the products, we also supply all the necessary documentation to our clients at the time of delivery, ensuring complete transparency and support throughout the process.
AWS Class ER410 filler is perfect for welding 410 and similar martensitic stainless steels used in valve bodies, pump shafts, fasteners, and gearbox components. It’s commonly found in oilfield equipment, steam turbine parts, and structural applications that require hardness and wear resistance. In Houston’s industrial fabrication shops, it’s used for maintenance repair work on steam system piping, turbine rotors, and structural braces that experience heat exposure of up to 800 °F. Compatible with both MIG and TIG welding, ER410 filler is chosen for its strength, corrosion resistance, and magnetic properties in applications like boiler components, industrial fasteners, and mechanical shafts.
©2024 Ed Stainless All Rights Reserved.
